Home
> PS28-3 Night vision Clip-on
The re-design improved performance. The next generation of our popular PS22 night vision clip-on. The new PS28 give your daytime scope Night Vision capability in a matter of seconds.
The ATN PS28 mounts in front of a daytime scope to enable nighttime operation. No shift of impact no need to re-zero or change of eye relief. The ATN PS28 uses the latest in image intensifier tube technology for outstanding resolution and performance.
Features:
- Easily changes daytime scope to Night Vision
- Mounts in front of daytime scope no rezeroing required
- Multi-coated all-glass optics
- Fast catadioptric front lens system
- Large 40 mm eyepiece/output window
- Lightweight and rugged
- Comes with Quick Release Mount
- Optional 7/8” weaver mount
- Optional Scope Mounting System for coupling to the objective of the day scope (25...62 mm diameter)
- Automatic Brightness Control
- Resistance to severe conditions
- Up to 50 hours of continuous operation with one Lithium battery
Specifications:
- Magnification: 1x
- Lens System: F/1.15 68 mm
- Proshield Lens Coating: Yes
- Field of View: 13°
- Exit Pupil: 40mm
- Range of Focus: 10m to Infinity
- Controls: Direct
- Remote Control: Yes
- Automatic Brightness Control: Yes
- Bright Light Cut-off: Yes
- Infrared Illuminator DetachableL IR850
- Power Supply: 1 3V CR123A Battery
- Battery Life: 50 Hours
- Environmental Rating: Waterproof
- MIL-STD-810: Yes
- Dimensions: 7.30" x 3.40" x 3.30”
- Weight: 1.98 lbs
- Color: Black
Tube Specifications:
- High Quality 3 Gen Image Intensifier Tube
- Description: Standard
- Generation: 3
- Photocathode Type: GaAs
- Resolution: 64 (lp/mm)
- Signal to Noise Ratio: 22 Typical
- Figure of Merit: 1600 Typical
- MTTF (Mean Time Before Failure): 10000 Hours
The ATN PS28 mounts in front of a daytime scope to enable nighttime operation. No shift of impact no need to re-zero or change of eye relief. The ATN PS28 uses the latest in image intensifier tube technology for outstanding resolution and performance.
Features:
- Easily changes daytime scope to Night Vision
- Mounts in front of daytime scope no rezeroing required
- Multi-coated all-glass optics
- Fast catadioptric front lens system
- Large 40 mm eyepiece/output window
- Lightweight and rugged
- Comes with Quick Release Mount
- Optional 7/8” weaver mount
- Optional Scope Mounting System for coupling to the objective of the day scope (25...62 mm diameter)
- Automatic Brightness Control
- Resistance to severe conditions
- Up to 50 hours of continuous operation with one Lithium battery
Specifications:
- Magnification: 1x
- Lens System: F/1.15 68 mm
- Proshield Lens Coating: Yes
- Field of View: 13°
- Exit Pupil: 40mm
- Range of Focus: 10m to Infinity
- Controls: Direct
- Remote Control: Yes
- Automatic Brightness Control: Yes
- Bright Light Cut-off: Yes
- Infrared Illuminator DetachableL IR850
- Power Supply: 1 3V CR123A Battery
- Battery Life: 50 Hours
- Environmental Rating: Waterproof
- MIL-STD-810: Yes
- Dimensions: 7.30" x 3.40" x 3.30”
- Weight: 1.98 lbs
- Color: Black
Tube Specifications:
- High Quality 3 Gen Image Intensifier Tube
- Description: Standard
- Generation: 3
- Photocathode Type: GaAs
- Resolution: 64 (lp/mm)
- Signal to Noise Ratio: 22 Typical
- Figure of Merit: 1600 Typical
- MTTF (Mean Time Before Failure): 10000 Hours
© Dead On Optics.
All Rights Reserved. Designed by KREATIVE
